ᱟᱨᱡᱟᱯᱟᱱᱤᱡᱽ ᱫᱚᱨᱮᱭᱟᱫᱚᱜ-ᱟ ᱾ᱢᱟᱭᱠᱨᱚᱣᱮᱵᱷ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱟᱛᱮ, ᱭᱩ ᱮᱥ ᱮ ᱯᱩᱨᱟᱹᱣ ᱮᱱᱟ ᱾ᱡᱟᱯᱟᱱᱤᱡᱽ ᱫᱚᱨᱮᱭᱟᱫᱚᱜ-ᱟ ᱾ ᱱᱳᱰ ᱠᱷᱚᱱ ᱱᱳᱰ {} } }
ᱰᱤᱯᱷᱚᱞᱴ {}}}}ᱡᱟᱯᱟᱱᱤᱡᱽ ᱫᱚᱨᱮᱭᱟᱫᱚᱜ-ᱟ ᱾ᱢᱤᱫ ᱞᱟᱹᱠᱛᱤᱭᱟᱱ ᱫᱟᱹᱵᱤ
{} } } } ᱨᱩᱠᱷᱤᱭᱟᱹ ᱥᱟᱫᱷᱚᱱ ᱞᱟᱹᱜᱤᱫ
．Remove ink or dust attached to LED UV regularly, and be careful when cleaning LED UV, so as not to damage the irradiated part at the bottom of the equipment. When there is a certain amount of dust or shading in the irradiation unit, it will result in poor ink curing and produce Pass marks. When the dirt is serious, please replace the parts. () {᱓} }}} } ©᱔ ᱨᱚᱝ ᱾
{} } } } ᱨᱚᱵᱚᱴ ᱥᱟᱶ ᱠᱟᱹᱢᱤ ᱠᱟᱱ ᱮᱴᱠᱮᱴᱚᱬᱮ ᱠᱚ ᱾
Use alcohol soaked cloth to remove ink attached to the worktable as required. Be careful when removing the solidified ink. Do not damage the worktable. After working on the table for a long time, it is difficult to remove ink by using alcohol. (keep the table clean at any time).
{} } } } ᱥᱴᱨᱤᱝ ᱯᱷᱟᱱᱥᱚᱱ ᱫᱚ ᱨᱚᱵᱚᱴ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱾
Attached ink may clog the adsorption holes on the working surface. Please remove the ink in the adsorption hole according to the needs. Care must be taken not to leave the fragments of solidified ink on the working surface.
ᱪᱤᱛᱟᱹᱨ 15. appoptions offio , https://teptions official offiftion keage lạgit̕ jạruṛ ge jạruṛ ge jạruṛ ge kạmi lạgit̕ kạmi lạgit̕ jạruṛ ge kạmi lạgit̕ jạruṛ ge kạmi lạgit̕ jạruṛ ge kạmi lạgit̕ jạruṛ ge ko ko ko ko .gov (freake }) ᱟᱢ ᱫᱚ 4G ᱵᱮᱴᱟᱨᱤ ᱨᱮ ᱢᱮᱱᱟᱜ-ᱟ᱾
