ᱡᱩᱫᱤ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱥᱟᱹᱨᱤ ᱜᱮ https://gutions ᱠᱟᱱᱟ, ᱱᱚᱶᱟ ᱫᱚ ᱟᱜᱟᱢ ᱨᱮ ᱵᱟᱝ ᱛᱟᱦᱮᱱ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱮᱯᱞᱤᱠᱮᱥᱚᱱ ᱠᱚ ᱨᱮ ᱵᱟᱝ ᱵᱚᱫᱚᱞ ᱟᱠᱟᱱᱟ ᱾ᱥᱤ ᱟᱨ ᱮᱥ ᱥᱤ ᱦᱚᱛᱮᱛᱮᱡᱤᱱᱤᱥ ᱨᱮᱭᱟᱜ ᱢᱮᱴᱨᱤᱠᱥ ᱵᱷᱮᱞᱭᱩ=᱐ ᱨᱮ ᱾
ᱪᱮᱫ ᱦᱩᱭᱩᱜᱼᱟ ᱡᱩᱫᱤ https:__________________________________________________________________ ᱯᱟᱨᱤᱵᱮᱥᱵᱷᱟᱨ ᱵᱚᱫᱚᱞ ᱛᱮ ᱾
ᱥᱤᱞᱤᱱᱰᱟᱨ ᱨᱮ ᱢᱮᱱᱟᱜ ᱥᱩᱱᱩᱢ ᱠᱚ ᱫᱚ ᱵᱟᱨ ᱞᱮᱠᱟᱱ ᱵᱤᱡᱽᱞᱤ ᱠᱚ ᱨᱮ ᱪᱷᱟᱯᱟ ᱟᱠᱟᱱᱟ:
1.Spectrum,that is,whether the light emitted by a light source such as a cylindrical printer UV lamp is consistent with the absorption spectrum of the cured product.
2.Intensity,that is,whether the light emitted by the cylindrical printer light source is sufficient to cause a photochemical reaction of the cured product.Due to the performance of the sensitizer inside the cured product(UV coating,ink,glue),the dosage is different,the main agent and the amount of agent The light transmittance and sensation are also different,so the curing ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱢᱟᱨᱟᱝ ᱵᱷᱟᱨᱥᱚᱱ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ [᱔] ᱾
3,the curing speed,too fast curing speed can not complete curing,and too slow will have a bad effect on the cured product.Such as pattern cracking,poor adhesion,etc.The curing speed varies with different cured products.
ᱚᱱᱰᱮ ᱢᱤᱫ ᱱᱳᱰ_ᱱᱳᱰ ᱧᱩᱛᱩᱢ ᱢᱮᱱᱟᱜᱼᱟ ᱾ᱥᱤ ᱤ ᱳ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮᱯ |ᱯᱨᱚᱠᱥᱤᱢᱟᱞ ᱨᱤᱥᱟᱭᱠᱞᱤᱝ ᱾
The UV lamp tube of the cylindrical printer mainly refers to the lamp tube that can emit ultraviolet light.When it emits light,it is accompanied by high heat,because it not only excites ultraviolet light,but also accompanied by infrared emission.The light wavelength is concentrated at about 365mm.The ratio is different due to 100 kDabletion lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕ lạgit̕, ᱟᱹᱰᱤ ᱢᱟᱨᱟᱝ, 95%, ᱟᱨ 20% ᱫᱚ 55.85% impoptions ᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ 2.0% ᱫᱚ ᱟᱹᱰᱤ ᱢᱟᱨᱟᱝ ᱜᱮᱭᱟ᱾
ᱱᱚᱶᱟ ᱫᱚ ᱵᱟᱝ ᱵᱟᱰᱟᱭ ᱟᱠᱟᱱᱟ ᱡᱮ UFC ᱫᱚ SEM ᱟᱨ USPs ᱠᱚ ᱫᱚ "Soocks" ᱠᱚ ᱠᱟᱱᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱟᱢ ᱡᱟᱦᱟᱸ ᱞᱮᱠᱟ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱛᱟᱦᱮᱱᱟ, ᱟᱨ ᱚᱱᱟ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱜᱮᱭᱟ.
